At this stage, you must already have on your computer the Stratosoftware installed.
It this is not the case, download it here.

Start the Stratosoftware. A window will open with a similar configuration to this picture:

capture-1

To load a 3D file in the software, click on «Files», then, on the menu, click on «load model file»

capture-2

A new window will open, find your 3D file and click on it to open it.

We are going to review the different menus that you must know in order to use the Stratosoftware.

capture-translation

Translation
Position of the item on the printing tray

capture-scale

Scale
Scale of the item to be printed

capture-rotation

Rotation
Placement of the item on the printing tray

capture-90X

Rotation 90° X
Rotation on the X axis
to the item on the printing tray

capture-90Y

Rotation 90° Y
Rotation on the Y axis
to the item on the printing tray

capture-90Z

Rotation 90° Z
Rotation on the Z axis
to the item on the printing tray

capture-multiply

Multiply
Number of copies to print

capture-split

Split
It allows to cut the item into pieces

capture-support

Support
You can build scaffoldings to support your item

capture-poubelle

Bin
Delete the item

capture-balais

Broom
Delete all the items

capture-setting

Settings
To choose the parameters of the printing: speed, quality, etc.

capture-control

Control
Adjust the temperature and the print head calibration

capture-gcode

Start/End G-Code
Customization of the printing: when to start/end the printing

capture-2

1. view mode
2. isometric view
3. front view
4. right view
5. left view
6. top view
7. bottom view
8. behind view
9. zoom +
10. zoom –
11. zoom

capture-connecttion

Connection
You can choose between «wifi» or «cable», it will change the type of connexion between your computer and the Stratomaker.