When you turn on your 3D Stratomaker 3D printer, a home page invites your to wait while the software is loading.

load

Then the home page menu appears, it has the shape of a wheel.

1

We are going to review the 8 icons…


setting

setting mode

You can parameter your machine from here.
when you click on this icon, the following screen appears

setting-2

If you click on the icon “connexion”, you will arrive to this screen

connection-1
Here you can choose the Wifi mode or connect your machine to your Ethernet network:
If you click on the icon “start wifi access point”, you will arrive to the next screen

connection-3

Pick your wifi network and the following screen will appear
The”refresh” button update the available network list

connection-2

Insert your password.
The Stratomaker 3D printer will be from now connected to your Wifi network.

If you prefer to use an Ethernet network,
connect the Ethernet wire between the machine and your router,
then click on the icon “Lan connection”.
The Stratomaker 3D printer will be from now connected to your Ethernet network.

To allow the dialogue between you computer and your printer through the Stratosoftware, click on the icon “connect to available network”.
After a few seconds, an IP number corresponding to your printer will show on the screen.
Note down this number, the Stratomaker software will request it.

setting-2

If you click on the icon “blink led”, you will arrive to the next screen
blink led

The small cursor on the chromatic wheel allows you to change colors of the 30
leds that the Stratomaker has.
The button “default” reset the colors to the original setting (white)
the button “save” save your preferences

setting-2

Click on the icon “language” and you will arrive to the next screen

langage

Here you can choose among some languages.

setting-2

Click on the icon “parameter”, and you will arrive to the next screen

parameter

Here you can change some parameters like the temperature and the length of the extrusion
(every parameter has its own window).

setting-2

Click on the icon “register” and you will arrive to the next screen

register

You can register your Stratomaker 3D printer on-line and start the guarantee.

setting-2

Click on the icon “pre-heat” and you will arrive to the next screen

pre-heat

Using the buttons “+” and “-”
you can change the extruders’ temperature
in accordance with the filament used


selectfile

Select file mode

Here you have different sources to print your items:
From a Sd-card, a Wifi file, using the Ethernet network
(if your printer has an Ethernet connection).
Click on the icon “select file” and you will arrive to the next screen

select file-2

If you want to print from a Sd-card, click on the icon “sd-card”
Click on the icon “sd-card” and you will arrive to the next screen

print file sd card

Select the file to print then click on the icon “open”
The file will be loaded and the interface will move to the “dash board” mode
The “update” button refresh the screen
The “reject” button remove the sd-card
The “delete” button erase the file

If you want to choose the Wifi network as your source, click on the icon “wifi”
when you click on this icon, you arrive to the next screen

print file wifi

Select the file to print, then click on the icon “open”
The file will be loaded and the interface will move to the “dash board” mode
The “update” button refresh the screen
The “reject” button remove the sd-card
The “delete” button erase the file

To use the wifi mode it is necessary to configure the wifi network first (see the setting mode)


jogmode

jog mode
 Click on this icon and you will arrive to the next screen

jog mode-2

Click on the bleu home icon on the to of each axis
and the extruder will move to the axis.
Use the buttons “+” and “-” to increase the displacements
in 0.1 mm/1 mm/10 mm/100 mm


camera

camera mode
Click on this icon and you will arrive to the next screen

camera-2

The Stratomaker has one on-board camera that allows you to follow the printing
on the printer’s touch screen, on your computer or on your smartphone.
You can also record the video.
The “caméra” button starts the recording
The “resize” button shows the video full screen
The “sd-card” button selects the destination of the recording


getone3d

getone3d.com mode
Click on this icon and you will arrive to the next screen

getone3d-2

We have at your disposal 3D files in  .STL format «optimized»
To print «click on print» on our library on-line.
These files are intended for beginners and for the users that don’t have time to set the parameters for an optimized printing.
These 3D files have the parameters for a quality printing.
Load the 3D file that you want to print on the printer.
(an Internet connexion is required)


buildlevel

build level mode
Click on this icon and you will arrive to the next screen

build level-5

Automatic calibration system for the printing tray.
In case of calibration errors, you will have to make some corrections manually.
For more details, click here


filament

Filament mode
Click on this icon and you will arrive to the next screen

8

It is here where you have to go before the filament bobbins changes
For more details, click here


dashboard

Dash board mode
Click on this icon and you will arrive to the next screen

dashboard-2

Here you start the printings clicking on the “start” button.
You can pause the printing with the “pause” button
or even the stop it.
You can adjust the speed using the “+” and “-” buttons
The indicator will show you the length of the printing.